XRS-AP - adaptation, limiting the wide beam of pulsed radiation of X-ray machines. It is a collimator with a side or end position of the window aperture, forming a solid angle of radiation with a desired geometry. Typical parameters of the collimator shown in Table. XRS-AP used in the device control pulse devices ARINA-3/7/9, PAMIRS-200/300 according to the requirements SanPin 2.6.1.3164-14, PNAЭ G-7-017-89.

The design tool executed according TU 4276-037-96651179-2015 in the form of a lead-diaphragm casing, having a steel shell to enhance the strength of. The box surface outside technical cloth glued protective, and the inside rubber, that prevents scratches on the unit. Aperture channel may be rectangular or circular shape. Fastening and fixing the collimator XRS-AP is performed on the belts flaw detector housing. The position of the radiation exit window can be set.

The use of lead-diaphragm casing XRS-AP helps to increase the quality of the x-ray image. This happens due to the fact, that a collimated radiation beam minimizes the effect of scattered and back-scattered radiation sensitive layer on X-ray film. In this case, there is a noticeable improvement in sharpness and contrast a negative. Besides, Absorber cover cuts off the unused portion of the X-ray, reducing its harmful effects on personnel.

XRS АП
collimators series for pulse production apparatus "Spektroflesh"

Equipment

• XRS AP-housing aperture, 1 PC.;
• passport, 1 PC.